The 30T01Y, 30T01R self-operated temperature (heating type) control valve

The company has obtained certifications such as TS equipment A1 level, CE, API 607, TR-CU, SIL3, etc.

Classification：

30 series self operated control valve

E-mail: sunny@reowocv.com

Message

Product Description

Summary
The 30T01Y/30T01R self–operated temperature ( heating type ) control valve is composed of the control valve anda temperature controller provided with fixed point control.
It is suitable for controlling differential pressure in the pipes of non–crrosive liquids,gases and steams.when the temperature of the controlled mediums rises,the control valve is closed
The main features are as follows:
1.It has the pressure balancingfunction with high sensitivity.
2.Low noise, reliable performance, free of maintenance
3.The standard modular design is adopted.
4.It adopts the imported fixed point controller, which has the over temperature protection function withreliablequality.
5.Various combined controls can be carried out through the assemblies.

Technical parameters andperformances

Body
DN		DN15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150mm
PN		PN1.6、4.0MPa
Flange standard		ANSI, JIS, DIN, GB, JB(special standards can be offered according to user requirements)
Body material		Cast iron (HT200, cast steel (ZG230-450), cast stainless steel (ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti)
Plug material	Hard seal	Stainless steel (1Cr18Ni9Ti, 1Cr18Ni12Mo2Ti) Stainless steel embedded with rubber ring
	Soft seal
Pressure balancing		Stainless steel bellows (DN15~125), balanced diaphragm DN150

Actuator

Actuator mode	T06		T17
Temperature setting range(°C)		-20~50 20~90 40~110 60~120
Special temperature setting(°C)		110~180 180~250
Temperature protection		Exceeding the set value 100°C
Time constant(S)	120		20
Temperature sensor material		Nickel-coated copper
Capillary tube length		5, 10, 15m

Performance

Set value error	±1.5%
Allowable leakage(under stipulated testing conditions)	Hard seal	4x0.01% valve rated capacity
	Soft seal	DN15~50	DN65~125	DN150~250
		10 bubbles/min	20 bubbles/min	40 bubbles/min

The 30T01Y、 30T01R self-operated temperature (heating typelcontrol valve

Allowable working temperature

DN		15~125mm
Seal type	Hard seal	≤150°C
		Cooling tank≤200°C
		Cooling tank and heat sink ≤350°C※
	Soft seal	≤150°C

Ratedflow coefficient, noise measuringcoefficient, allowable differential pressure

DN		15	20	25	32	40	50	65	80	100	125	150	200	250
Rated flow coefficient		4	6.3	8	16	20	32	50	80	125	160	280	320	450
Noise measuring coefficient Z value		0.6	0.6	0.6	0.55	0.55	0.5	0.5	0.45	0.4	0.35	0.3	0.2	0.2
Allowable differential pressure(Mpa)	PN16	1.6								1.5		1.2	1.0
Allowable differential pressure(Mpa)	PN40	2.0								1.5		1.2	1.0

Working principle

When the temperature of the controlled object is lower than the set temperature, the liquid in the temperature sensor will contract, the force acted on the push rod of the actuator decreases, and the plug makes the valve open under the action of the spring force. The flow of steam, hot oil and other heating media is enhanced, so that the temperature of the controlled object rises. The valve will be closed when the temperature of the controlled object rises to the set value. After the valve is closed, the temperature of the controlled object falls and the valve is opened again. The heating media enter the heat exchanger and the temperature rises again, so as to make the temperature of the controlled object be a constant. The opening of the valve is related to the difference between the actual temperature of the controlled object and the set temperature.

Dimensions and weight of control valve

DN(mm)	15	20	25	32	40	50	65	80	100	125	150
L(mm)	130	150	160	180	200	230	290	310	350	400	480
B(mm)	212	212	238	238	240	240	275	275	380	380	295
Weight (Kg)	6.2	6.7	9.7	13	14	17	29	33	60	70	80

Dimensions and weight of actuator

Model	I(mm)	d(mm)	R(mm)	m	Weight(kg)
T06	380	24	1"	280	3.0
T17	500	30	1"	280	3.5

Difference between actuator T06 and T17:

The T06 model temperature sensor is isolated from the controlled medium through the temperature sensor sleeve, i.e., it does not contact the medium and it is easy to maintain. But the response is slow. It is suitable for controlling liquid media.
The T17 model temperature sensor directly contacts the controlled medium, and the temperature sensing area is large. Therefore the response is fast. But it is not easy to maintain. It is suitable for controlling gas temperature and liquid temperature.

Keyword：

30 series self operated control valve

temperature

controlled

certification

WORKSHOP

Blank size

Blank size 1

Spectral analysis

Spectral analysis 1