Contact Us
Contact us: Jack Wu
Tel:+86-577-67379084
Fax: +86-577-66997700
Mobile: +86-15957799534
Skype: jack.wu102
Email: reowocv@gmail.com
Contact us: SUNNY HUANG
E-mail: sunny@reowocv.com
Wechat/Whatsapp: +86-13868397001
30L01T01Y/30L01T01R、30L01T02Y/30L01T02R self-operated flow and temperature control valve
The company has obtained certifications such as TS equipment A1 level, CE, API 607, TR-CU, SIL3, etc.
Classification:
30 series self operated control valve
E-mail: sunny@reowocv.com
Product Description
Summary
The 30L01T01Y/30L01T01R、30L01T02Y /30L01Y02R self‑operated temperature control valve (cooling type) is composed of the control valve and a temperature controller provided with fixed point control.
It is suitable for controlling temperature of non‑corrosive liquids, gases and steams in various cooling systems.
When the temperature of the controlled medium rises, the control valve is opened.
The main features are as follows:
1.It has the pressure balancing function with high sensitivity.
2.Low noise, reliable performance, free of maintenance
3.The standard modular design is adopted.
4.The flow is adjusted according to the standard figure by the throttle valve,which is convenient and fast.
5.It adopts the imported fixed point controller,which has the over temperature protection function with reliable quality.
6.Various combined controls can be carried out through the assemblies.
Technical parameters andperformances
| Body | ||
DN | DN15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150mm | |
PN | PN1.6、4.0MPa | |
Flange standard | ANSI, JIS, DIN, GB, JB(special standards can be offered according to user requirements) | |
Body material | Cast iron (HT200, cast steel (ZG230-450), cast stainless steel (ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti) | |
Plug material | Hard seal | Stainless steel (1Cr18Ni9Ti, 1Cr18Ni12Mo2Ti) Stainless steel embedded with rubber ring |
Soft seal | ||
Pressure balancing | Stainless steel bellows (DN15~125), balanced diaphragm (DN150~250) | |
D05 actuator
Effective area | 250 | 630 |
Pressure setting range(MPa) | 0.02;0.05 | |
Allowable maximum differential pressure between the upper and lower diaphragm chambers | 0.4 | 0.15 |
Material | Diaphragm cover: galvanized steel sheet; diaphragm: EPDM or FKM with fiber | |
Control pipeline, connection | Copper pipe or steel pipe Φ10X1(mm); ferrule connection: R1/4" | |
Actuator
Effective area | 250 |
Pressure setting range | 0.01~0.12 0.08~0.25 0.2~0.5 0.45~0.1 0.6~2.0 |
Minimum differential pressure tha ensures normal work of the pressure valve | DN15~125: 0.08;DN150~250: 0.1 |
Allowable maximum differential pressure between the upper and lower diaphragm chambers | 0.4 |
Material | Diaphragm cover: galvanized steel sheet; diaphragm: EPDM or FKM with fiber |
Control pipeline, connection | Copper pipe or steel pipe Φ10X1(mm); ferrule connection: R1/4" |

Performance
Set value error | 30L01Y ±5°C | 30T01Y 30T01R ±1.5°C | ||
Allowable leakage(under stipulated testing conditions) | Hard seal | 4x0.01% valve rated capacity | ||
Soft seal | DN15~50 10 bubbles/min | DN65~125 20 bubbles/min | DN150~250 40 bubbles/min | |
Allowable working temperature
DN | 15~125mm | 150~250mm | |
Seal type | Hard seal | ≤150°C | ≤140°C |
Cooling tank≤200°C | Cooling tank and extension≤200°C | ||
Soft seal | ≤150°C | ||
Rated flow coefficient, noise measuring coefficient, allowable differential pressure
DN |
| 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 |
Rated flow coefficientKvS |
| 4 | 6.3 | 8 | 16 | 20 | 32 | 50 | 80 | 125 | 160 | 280 |
Differential pressure flow range of throttle | 0.02MPa | 0.1-2 | 0.2-3 | 0.2-4 | 0.4-7 | 0.6-11 | 0.8-16 | 4-40 | 3-28 | 6-63 | 8-80 | 12-125 |
0.05MPa | 0.2-3 | 0.3-4.5 | 0.3-6 | 0.5-10 | 0.8-16 | 1.1-24 | 4-40 | 6-58 | 9-90 | 12-120 | 18-180 | |
| Noise measuring coefficient Z value | 0.6 | 0.6 | 0.6 | 0.55 | 0.55 | 0.5 | 0.5 | 0.45 | 0.4 | 0.35 | 0.3 | |
Allowable differential pressure(Mpa) | PN16 | 1.6 | 1.5 | 1.2 | ||||||||
PN40 | 2.0 | |||||||||||
Working principle
According to different combinations, refer to the working principle of the self‑operated flow control valve and self‑operated temperature control valve (cooling type/heating type). (Working according to the priority action principle)

Dimensions and weight of control valve
DN(mm) | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 |
L(mm) | 130 | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 |
B(mm) | 212 | 212 | 238 | 238 | 240 | 240 | 275 | 275 | 380 | 380 | 295 |
B1(mm) | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | 630 |
Weight(kg) | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | 140 |

Dimensions and weight of actuator
Effective area(cm²) | 250 |
R(mm) | 263 |
H(mm) | 150 |
Weight(Kg) | 9 |
Model | l(mm) | D(mm) | R(mm) | M | Weight (Kg) |
T06 | 380 | 24 | 1" | 280 | 3.0 |
T17 | 500 | 30 | 1" | 280 | 3.5 |
Keyword:
30 series self operated control valve
pressure
valve
certification
WORKSHOP
Blank size
Blank size 1
Spectral analysis
Spectral analysis 1
Related Products
70S Series low load butterfly valve
The company has obtained certifications such as TS equipment A1 level, CE, API 607, TR-CU, SIL3, etc.
The company has obtained certifications such as TS equipment A1 level, CE, API 607, TR-CU, SIL3, etc.
50P Series eccentric rotary valve
The company has obtained certifications such as TS equipment A1 level, CE, API 607, TR-CU, SIL3, etc.
70E Series high-performance Butterfly Valve
The company has obtained certifications such as TS equipment A1 level, CE, API 607, TR-CU, SIL3, etc.
Message
*Leave your contact information to get a free product quote